Skip to product information
1 of 5

Concentric Cycling

Mount for Trek Madone Gen 7

Mount for Trek Madone Gen 7

Regular price $45.00 AUD
Regular price Sale price $45.00 AUD
Sale Sold out
Shipping calculated at checkout.

3D printed seat post mount perfectly dimensioned for the Trek Madone Gen 7.

Manufactured in Australia from Carbon Nylon for strength, durability and heat/UV resistance. Supplied with high quality blackened stainless steel fixings (M4 20mm bolt and M4 all-metal lock nut).

Mount options available for the following:

  • Garmin Varia RTL5##/RVR3## Series*
  • Magene L508/L308*
  • Garmin Varia RCT715
  • Bontrager Flare RT / Trek CarBack
  • Cateye (Viz, Rapid, Reflext and Omni)
  • Chilli Tech Rear Camera & Light (new)
  • Cycliq Fly6 CE/Pro*
  • Giant Recon TL
  • Moon (Comet-X Pro, Nebula, Shield-X)
  • Moon Helix / MagicShine SeeMee (includes DV Camera)
  • Specialized Stix Elite
  • Go Pro compatible accessories

*NEW Apple AirTag combo mount now available!

Standard and express shipping available at the checkout.

Replace the stock mount or rubber bands with a secure solution that is custom designed for your bike.

Shipping, Taxes & Returns

We ship most orders within 1 business day.

All orders are dispatched from Perth, Western Australia.

---------------------------------------------

International Shipping

New Zealand - AU $7 flat rate
US / Canada / Asia Pacific - AU $10 flat rate
UK / Europe / Rest of World - AU $15 flat rate

Free standard shipping / discounted express shipping on orders over AU $100.

 

Import Duties and Sales Tax

Please note the following regarding import duties and sales taxes:

USA - there are no duties for imports into the USA due to the Australia-United States Free Trade Agreement (AUSFTA). Sales tax may apply in some states.

European Union / Northern Ireland - for orders up to 150 EUR, sales tax is included in the product price and import duties are waived. Orders over 150 EUR are without sales tax, which will need to be paid together with import duties on arrival into the EU.

UK - we are in the process of integrating sales tax and duties into our website. At this time, these are not included in the purchase price and will need to be paid on arrival into the UK.

Other countries - please refer to your local customs office for information on duties payable.

Concentric Cycling is not liable for local duties, taxes or losses that may arise from a customer refusing to pay the relevant duties on a purchase.

 

Shipping time from Australia in business days is as follows:

(For major cities delivery is usually on the lower end)

USA / UK / NZ
Standard - 5 to 15 days
Express - 3 to 8 days

Canada
Standard - 10 to 20 days
Express - 5 to 10 days

Asia Pacific
Standard - 10 to 20 days
Express - 4 to 8 days

Europe / Rest of World
Standard - 15 to 25 days
Express - 6 to 10 days

---------------------------------------------

Domestic Shipping (Australia)

Standard shipping - AU $5 flat rate
Express shipping - AU $10 flat rate

Free standard shipping / discounted express shipping on orders over AU $100.

 

Orders within Australia include GST.

 

Shipping time in business days is as follows:

(For major cities delivery is usually on the lower end)

Standard - 2 to 8 days
Express - 1 to 4 days

---------------------------------------------

Return Policy

We offer a 30 day return policy. If you are unhappy with your purchase for whatever reason, including change of mind, contact us within 30 days of making your purchase, and we will happily issue a replacement or refund.

To be eligible for a return, your item must be unused and in the same condition that you received it. Partial refunds may be granted at the discretion of Concentric Cycling whereby these conditions are not met.

---------------------------------------------

Return Shipping

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

---------------------------------------------

Refunds

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment.

---------------------------------------------

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, please contact us here.

Care and Installation Instructions

Carbon Nylon is a strong, durable and heat resistant material, however it can be worn down over time from unwanted abrasion. To ensure a long life for your mount, we recommend cleaning your bike light and mount after a wet and dirty ride. Particular attention should be given to remove any sand/grit from the interface between the mount and your light.

 

To ensure a perfect fit of your Concentric Cycling product, please follow these recommended installation instructions:

 

Seat post mounts

1. Remove the bolt from the assembled mount using a 2.5mm hex key.

2. Carefully flex the seat clamp open and fit it around the seat post.

3. Position the seat clamp in the desired position (e.g. at the base of the seat post).

4. Pre-install the bolt into the seat clamp (drive-side of the bike).

5. Place the light mount into the opening, and commence threading the bolt into place using a 2.5mm hex key.

6. Before threading the bolt through the other side of the seat clamp, ensure that the lock nut is in position and hold if required.

7. Slowly thread the bolt through the non-drive side of the seat clamp and into the lock nut until it is hand tight (max 1.5nm).

8. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the lock nut.

 

Saddle mounts

 1. If using an Apple Airtag model, place the Airtag into the base plate and pivot the cover plate into position starting from the clip side.

2. Position the mount below the mounting points on your saddle

3. Install the bolts through the mounting points and screw them into the saddle until hand tight (max 1.5nm).

4. Remove the M5 bolt and lock nut from the GoPro mount, being careful not to drop them.

5. Insert your chosen accessory or GoPro adaptor, and reinstall the M5 bolt and lock nut until it is loosely in position.

6. Adjust the GoPro adaptor to your preferred angle.

7. Tighten the M5 bolt until it is hand tight (max 1.5nm).

8. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the lock nut.

 

Race number holder / adaptor

1. Slide in the race number

2. Insert the fixing through the race number and holder

3. Click in the locking mechanism

4. Twist/slide the race number holder into your Concentric Cycling Seat Post Mount

 

Head unit mounts

1. Thread the bolt into either the GoPro or Blank attachment

2. Position the GoPro or Blank attachment into the head unit mount and proceed to screw the bolt into the front integrated fitting on your handlebar until loosely in position

3. Position the rear bolt into the adjustable area and screw into the rear integrated fitting on your handlebar, again until loosely in position

4. Tighten the bolts using a torque wrench to max 2.0nm

5. If using the GoPro attachment, insert your chosen accessory and thread the bolt into the lock nut until it is hand tight (max 1.5nm).

6. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the head unit mount and attachments.

*Note that selected mounts (Cervelo S5 / BMC ICS) include shims which should be used to further refine the position and angle of your head unit. These should be placed between the head unit mount and the handlebars with the textured surfaces pressed together.

View full details

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
M
Marcel S.
Perfect fit and quality

Perfect fit and quality.
Fast and cheap shipping to Europe (Switzerland).
Highly recommended.

R
Russell G.
Madone Gen7 Garmin Viara rear light mount

Great comms after purchase and quick delivery considering I’m in the UK.
Fitted perfectly and does exactly as it says on the tin.
Would use this company again for sure.
Thanks.

Thanks Russell! Looking forward to your business in the future :)

K
Kevin L.K.H.

99% fit. Fast delivery

M
Mark W.
Mine didn’t match seat post dimension.

Unfortunately tolerances were off for my mount. Too tight by about .5mm on the depth of the seat post. I made the part work with a little cutting and drilling. Customer service was quick and helpful, investigated the issue and offered to replace the part.

Hi Mark, Thank you for this feedback. I understand that the issue was due to a printing error for the specific batch of this product - we have since replaced our inventory. While I'm glad you were able to make it work, please let us know if you have any ongoing issues. I will be happy to arrange to replace your mount. Thanks!

J
Joel I.

Mount for Trek Madone Gen 7