Concentric Cycling
Mount for Selle Italia Saddle (Flite, Novus, Watt)
Mount for Selle Italia Saddle (Flite, Novus, Watt)
Couldn't load pickup availability
3D printed GoPro mount perfectly dimensioned for Selle Italia saddles (Flite, Novus, Watt).
Available in 2 styles - with or without an Apple AirTag holder.
This mount can be combined with adaptors for any of the following:
- GoPro only
- Garmin Varia RTL5##/RVR3## Series
- Garmin Varia RCT715
- Magene L508/L308
- Cycliq Fly6 CE/Pro
- Bontrager Flare RT / Trek CarBack
- Cateye (Viz, Rapid, Reflext and Omni)
- Giant Recon TL
- Moon (Comet-X Pro, Nebula, Shield-X)
- Moon Helix / MagicShine SeeMee (includes DV Camera)
- Specialized Stix Elite (Vertical)
- Specialized Stix Elite (Horizontal - image pending)
Our GoPro mounts and adaptors are positioned at the rear of the saddle so that small saddle bags can in most situations still be mounted under your saddle.
Manufactured in Australia from Carbon Nylon for strength, durability and heat/UV resistance. Supplied with the following blackened stainless steel fixings:
- 2 x 16mm M5 bolts (for saddle)
- 1 x 20mm M5 bolt (for GoPro mount)
- 1 x M5 All-metal lock-nut (for GoPro mount)
Replace the stock mount or rubber bands with a secure solution that is custom designed for your bike.
Shipping, Taxes & Returns
Shipping, Taxes & Returns
We ship most orders within 1 business day.
All orders are dispatched from Perth, Western Australia.
---------------------------------------------
International Shipping
New Zealand - AU $7 flat rate
US / Canada / Asia Pacific - AU $10 flat rate
UK / Europe / Rest of World - AU $15 flat rate
Free standard shipping / discounted express shipping on orders over AU $100.
Import Duties and Sales Tax
Please note the following regarding import duties and sales taxes:
USA - there are no duties for imports into the USA due to the Australia-United States Free Trade Agreement (AUSFTA). Sales tax may apply in some states.
European Union / Northern Ireland - for orders up to 150 EUR, sales tax is included in the product price and import duties are waived. Orders over 150 EUR are without sales tax, which will need to be paid together with import duties on arrival into the EU.
UK - we are in the process of integrating sales tax and duties into our website. At this time, these are not included in the purchase price and will need to be paid on arrival into the UK.
Other countries - please refer to your local customs office for information on duties payable.
Concentric Cycling is not liable for local duties, taxes or losses that may arise from a customer refusing to pay the relevant duties on a purchase.
Shipping time from Australia in business days is as follows:
(For major cities delivery is usually on the lower end)
USA / UK / NZ
Standard - 5 to 15 days
Express - 3 to 8 days
Canada
Standard - 10 to 20 days
Express - 5 to 10 days
Asia Pacific
Standard - 10 to 20 days
Express - 4 to 8 days
Europe / Rest of World
Standard - 15 to 25 days
Express - 6 to 10 days
---------------------------------------------
Domestic Shipping (Australia)
Standard shipping - AU $5 flat rate
Express shipping - AU $10 flat rate
Free standard shipping / discounted express shipping on orders over AU $100.
Orders within Australia include GST.
Shipping time in business days is as follows:
(For major cities delivery is usually on the lower end)
Standard - 2 to 8 days
Express - 1 to 4 days
Care & Installation Instructions
Care & Installation Instructions
Carbon Nylon is a strong, durable and heat resistant material, however it can be worn down over time from unwanted abrasion. To ensure a long life for your mount, we recommend cleaning your bike light and mount after a wet and dirty ride. Particular attention should be given to remove any sand/grit from the interface between the mount and your light.
To ensure a perfect fit of your Concentric Cycling product, please follow these recommended installation instructions:
Seat post mounts
1. Remove the bolt from the assembled mount using a 2.5mm hex key.
2. Carefully flex the seat clamp open and fit it around the seat post.
3. Position the seat clamp in the desired position (e.g. at the base of the seat post).
4. Pre-install the bolt into the seat clamp (drive-side of the bike).
5. Place the light mount into the opening, and commence threading the bolt into place using a 2.5mm hex key.
6. Before threading the bolt through the other side of the seat clamp, ensure that the lock nut is in position and hold if required.
7. Slowly thread the bolt through the non-drive side of the seat clamp and into the lock nut until it is hand tight (max 1.5nm).
8. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the lock nut.
Saddle mounts
1. If using an Apple Airtag model, place the Airtag into the base plate and pivot the cover plate into position starting from the clip side.
2. Position the mount below the mounting points on your saddle
3. Install the bolts through the mounting points and screw them into the saddle until hand tight (max 1.5nm).
4. Remove the M5 bolt and lock nut from the GoPro mount, being careful not to drop them.
5. Insert your chosen accessory or GoPro adaptor, and reinstall the M5 bolt and lock nut until it is loosely in position.
6. Adjust the GoPro adaptor to your preferred angle.
7. Tighten the M5 bolt until it is hand tight (max 1.5nm).
8. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the lock nut.
Race number holder / adaptor
1. Slide in the race number
2. Insert the fixing through the race number and holder
3. Click in the locking mechanism
4. Twist/slide the race number holder into your Concentric Cycling Seat Post Mount
Head unit mounts
1. Thread the bolt into either the GoPro or Blank attachment
2. Position the GoPro or Blank attachment into the head unit mount and proceed to screw the bolt into the front integrated fitting on your handlebar until loosely in position
3. Position the rear bolt into the adjustable area and screw into the rear integrated fitting on your handlebar, again until loosely in position
4. Tighten the bolts using a torque wrench to max 2.0nm
5. If using the GoPro attachment, insert your chosen accessory and thread the bolt into the lock nut until it is hand tight (max 1.5nm).
6. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the head unit mount and attachments.
*Note that selected mounts (Cervelo S5 / BMC ICS) include shims which should be used to further refine the position and angle of your head unit. These should be placed between the head unit mount and the handlebars with the textured surfaces pressed together.







Add another adaptor to your saddle mount
GoPro to Rear Light Adaptor
Share


