Skip to product information
1 of 2

Concentric Cycling

Spare Part for Cateye (Viz, Rapid, Reflext and Omni)

Spare Part for Cateye (Viz, Rapid, Reflext and Omni)

Regular price $17.00 USD
Regular price Sale price $17.00 USD
Sale Sold out

Have you purchased a complete seat post mount or race number holder from us? Would you like to exchange the mount to another design, while continuing to use the same seat clamp? No problem! You can now purchase these components separately :)

Simply select your bicycle / seat post model and we'll do the rest.

Please Note: This item is for the light mount only. The seat post clamp is not included.

Shipping & Returns

Domestic Shipping (Australia)

Standard shipping AU $5 flat rate

Express shipping AU $10 flat rate

Free standard shipping / discounted express shipping on orders over AU $100.

 

International Shipping

New Zealand AU $7 flat rate

Asia Pacific / US / Canada AU $10 flat rate

UK / Europe / Rest of World AU $15 flat rate

Free standard shipping / discounted express shipping on orders over AU $100.

 

All orders are dispatched out of Perth, Western Australia. Delivery time varies depending on the location.

International orders may be subject to customs rates, please refer to your local customs office for information on duties payable.

Concentric Cycling is not liable for local duties, taxes or losses that may arise from a customer refusing to pay the relevant duties on a purchase.

 

Return Policy

We offer a 30 day return policy. If you are unhappy with your purchase for whatever reason, including change of mind, contact us within 30 days of making your purchase, and we will happily issue a replacement or refund.

To be eligible for a return, your item must be unused and in the same condition that you received it. Partial refunds may be granted at the discretion of Concentric Cycling whereby these conditions are not yet.

 

Return Shipping

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

 

Refunds

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment.

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at taylor@concentriccycling.com

Care and Installation Instructions

Carbon Nylon is a strong, durable and heat resistance material, however it can be worn down over time from unwanted abrasion. To ensure a long life for your mount, we recommend cleaning your bike light and mount after a wet and dirty ride. Particular attention should be given to remove any sand/grit from the interface between the mount and your light.

 

To ensure a perfect fit of your Concentric Cycling product, please follow these recommended installation instructions:

 

Seat post mounts

1. Remove the nut and bolt from the assembled mount using a 2.5mm hex key.

2. Carefully flex the seat clamp open and fit it around the seat post.

3. Position the seat clamp in the desired position (e.g. at the base of the seat post).

4. Pre-install the bolt into the seat clamp (drive-side of the bike).

5. Place the light mount into the opening, and commence threading the bolt into place using a 2.5mm hex key.

6. Before threading the bolt through the other side of the seat clamp, place the lock nut into position and hold.

7. Slowly thread the bolt through the non-drive side of the seat clamp and into the lock nut until it is hand tight (max 1.5nm).

8. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the lock nut.

 

Race number holder / adaptor

1. Slide in the race number

2. Insert the fixing through the race number and holder

3. Click in the locking mechanism

4. Twist/slide the race number holder into your Concentric Cycling Seat Post Mount

 

Head unit mounts

1. Thread the bolt into either the GoPro or Blank attachment

2. Position the GoPro or Blank attachment into the head unit mount and proceed to screw the bolt into the front integrated fitting on your handlebar until loosely in position

3. Position the rear bolt into the adjustable area and screw into the rear integrated fitting on your handlebar, again until loosely in position

4. Tighten the bolts using a torque wrench to max 2.0nm

5. If using the GoPro attachment, insert your chosen accessory and thread the bolt into the lock nut until it is hand tight (max 1.5nm).

6. Do not over tighten or assemble at high speed as this may result in galling of the metal parts and/or damage to the head unit mount and attachments.

*Note that the Cervelo S5 computer mount include a set of 4 spacers (High 2.5 & 5.0 degrees and Low 2.5 & 5.0 degrees) which can be used to further refine the position and angle of your head unit. If used, these should be placed between the head unit mount and the handlebars with the textured surfaces pressed together.

View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)